|
1、 同时检测多个喷油嘴工作状况
2、检测喷油嘴的密封性、滴漏及喷油量
3、变速、变脉宽动态过程的喷油量和均匀度检测
4、鉴别各个喷油嘴是否同一品牌及开关周期是否一致
5、计次或计时、自动或和手动检测方式任选
6、反向、倒流清洗、免折清洗（需配免拆接头）
7、油泵保护装置
8、自动排油、回油
9、通过进口背光灯观察喷油嘴工作情况
10、全自动模拟、测试各种喷油嘴在常喷、怠速、中速、高速、变速工作的全过程
11、怠速、中速、高速喷油量和均匀度、喷油角度、雾化状检测
12、配置通用的测试架油路器，选配特种车型喷油嘴接头，可适用国内外所有车型喷油嘴检测清洗
1. Diagnose the condition and performance of multiple fuel injectors at a time
2. Inspect the injector dribbling, sealing performance and distributive value
3. Test the distributive value and uniformity coefficient in the course of rotate speed and pulse width changing
4. Identify whether the injectors are of the same brand and their on off cycle match
5. Optional between number of times counting and time counting, automatic detection and manual detection
6. Reverse flushing, Flush-back cleaning, and disaffiliation-free flushing (disaffiliation-free connectors needed)
7. Protector for oil pump
8. Automatic drainage and scavenge
9. Inspect the operation of the injectors by the backlight
10. Automatically simulate and diagnose the overall process during continuous injection, idle speed, medium speed, high speed, and rotation speed
11. Detect distributive value, uniformity, injecting angle and atomization during idle speed, medium speed and high speed
12. Equipped with universal oil conduit; selectively equipped with connectors for specific models of cars, and can be used for analyzing and cleaning with all types of connectors, domestic or abroad
|
